MIRC CTP

This article describes the stand-alone processing application for clinical trials data.

1 Clinical Trial Processor (CTP)

CTP is a stand-alone program that provides all the processing features of a MIRC site for clinical trials in a highly configurable and extensible application. It connects to FieldCenter applications and can also connect to MIRC sites when necessary. CTP has the following key features:

Single-click installation.
Support for multiple pipelines.
Processing pipelines supporting multiple configurable stages.
Support for multiple quarantines for data objects which are rejected during processing.
Pre-defined implementations for key components:
- HTTP Import
- DICOM Import
- DICOM Anonymizer
- XML Anonymizer
- File Storage
- Database Export
- HTTP Export
- DICOM Export
- FTP Export
Web-based monitoring of the application's status, including:
- configuration
- logs
- quarantines
- status

1.1 Installation

The installer for CTP is available on the RSNA MIRC site. Click the Download Software link in the left pane in the left pane of the MIRC home page to obtain a list of all the available software.

Download the installer and place it on the disk on which you intend to install or upgrade the CTP program.

To run the installer, the Java 1.5 (or better) JRE must be present on the system. Java 1.6 or 1.7 is recommended because 1.5 has reached its end of life and is being sunset by Oracle/Sun. Java and all its components are available through the Java website. Note that only the JRE is required, not the JDK.

For convenience, it is recommended (but not required) that a folder called JavaPrograms be created in the root of the disk drive. The installer does not create this folder, but if it is present, the installer will very quickly find it and suggest installing CTP in a subdirectory of JavaPrograms. This is especially helpful when upgrading.

Certain CTP pipeline stages (FileStorageService, BasicFileStorageService) require that the Java Advanced Imaging ImageIO Tools be present on the system. It is critically important that version 1.1 of the ImageIO Tools be installed rather than version 1.0. You should also get the jre version (for Windows, it has a name like jai_imageio-1_1-lib-windows-i586-jre.exe), not the one for the CLASSPATH, which does not include -jre in the name. Parenthetically, note that the Java Advanced Imaging component is not the same as the Java Advanced Imaging ImageIO Tools. Only the latter component is required. (Macintosh users should read ImageIO Tools for Macintosh in the Notes section.) When the installer runs, it checks several parameters of the system and highlights ones that are not correct for the running of CTP. One such parameter is the version of the ImageIO Tools. The ImageIO Tools need not be present in order to run the installer, and they may be installed later if required, without having to re-install CTP.

To run the CTP installer, double-click the CTP-installer.jar file and choose a directory in which to install CTP. The installer can also be run in a command window using the command:

java -jar CTP-installer.jar

The installer creates a directory called CTP in the selected location and places several files and directories in it. Two files of special importance are:

Launcher.jar - the program that launches CTP with a user interface
Runner.jar - the program that starts or stops CTP with no user interface

1.2 Running CTP

There are three ways to start CTP:

Launcher.jar - a program for manually starting and stopping CTP through a dialog window. This program is normally used when CTP is installed on an individual user's computer for occasional use.
Runner.jar - a program for starting and stopping CTP with no user interface. This program is normally used when CTP is installed on a Linux or Mac system for institutional use, running as an automatic service. See Running CTP as a Linux Service (not yet written) for instructions.
CTP can also be run as a Windows service. See Running CTP as a Windows Service for instructions.

The launcher displays a dialog providing start/stop buttons and fields for controlling several parameters used by the system.

The Server port field allows you to change the port on which the server runs.

The default memory configuration is sufficient for all but the very largest sites. For sites with 2000 or more teaching file cases, the Maximum memory pool parameter should be increased to 500. For sites with more than 3000 cases, 750 is recommended. To change the memory configuration for the Windows service, see the article.

The Extensions directory parameter is intended for special applications in which third-party software is added into the system. One such application is the NCI's National Biomedical Image Archive (NBIA). Normal teaching file systems do not require this parameter.

Across the top of the dialog are several tabs providing access to information about the versions of the components, the system parameters in use by Java as the program runs, and any messages output by the program either directly or through its log file. These are only present as a convenience; they are not typically used in normal operation.

As a convenience, the CTP Home Page button launches the user's browser and goes directly to the main MIRC page.

CTP has no user interface. When the program starts, it runs without intervention. Status and other information can be obtained through the program's integrated webserver. Accessing the server with no path information displays a page presenting buttons for each of the servlets.

When the program is first installed, two users are provided. One user, with the name admin and password password, is intended for general system administration. The other user, with the name king and password password, has the ability to shut down the server through the browser interface. Both users have the ability to create and modify users and assign privileges through the User Manager, but only a user with the shutdown privilege can grant the shutdown privilege to another user.

To stop the program, click the Stop button on the Launcher, or log in as a user with the shutdown privilege and click the Shutdown button on the main page. As a convenience, a user with the admin privilege can also shut the server down if the user's browser is running on the same computer as the server.

1.3 Configuration Files

The program uses two configurable files: config.xml, which is located in the same directory as the program itself, and index.html, which is located in the server's ROOT directory. Both files are intended to be configured for the specific application. The installer does not overwrite these files when it runs; instead, it installs two example files: example-config.xml and example-index.html. When CTP starts, it looks to see if the non-example files are missing, and if so, it copies the example files into the non-example ones. This process allows upgrades to be done without losing any configuration work. After installing the program the first time, it should be run once in order to make the copies, and then the copies can be configured. Configuration is done by hand with any text editor (e.g., TextPad or NotePad). Care should be taken, especially with config.xml, to keep it well-formed. Opening it with a program like InternetExplorer will check it for errors.

1.4 Server

To provide access to the status of the components, the application includes an HTTP server which serves files and provides servlet-like functionality. Files are served from a directory tree whose root is named ROOT. The ROOT directory contains a file, index.html, which provides buttons which link to several servlets providing information about the operation of the program. This file is intended to be configured with logos, additional links, etc., and upgrades do not overwrite it. The standard servlets are:

LoginServlet allows a user to log into the system.
UserManagerServlet allows an admin user to create users and assign them privileges.
ConfigurationServlet displays the contents of the configuration file.
SysPropsServlet displays the system properties which define the environment in which CTP is running, and provides an admin user the ability to force a garbage collection.
StatusServlet displays the status of all pipeline stages.
LogServlet provides web access to all log files in the logs directory.
QuarantineServlet provides web access to all quarantine directories and their contents.
IDMapServlet allows an admin user to access a database of PHI and anonymized replacements for patient IDs accession numbers, and UIDs.
ObjectTrackerServlet allows an admin user to access a database of the identifiers of objects which have been processed, organized by date, patient ID, Study UID, Series UID, and Instance UID.
DBVerifierServlet allows an admin user to access a database which tracks the status of objects as they are inserted into an external database (which may be in a remote instance of CTP).
DicomAnonymizerServlet allows an admin user to configure any DICOM anonymizers in the pipelines.
ScriptServlet allows an admin user to configure the scripts for script-based pipeline stages, including the various Filter stages and the XML and Zip anonymizers.
LookupServlet allows an admin user to configure lookup tables used by the anonymizers.
ShutdownServlet allows an admin user to shut the program down.

The configuration element for the HTTP server is:

        <Server 
            port="80"
            ssl="no"
            requireAuthentication="no"
            proxyIPAddress=""
            proxyPort=""
            proxyUsername=""
            proxyPassword=""
            keystore=""
            keystorePassword=""
            truststore=""
            truststorePassword=""
            usersClassName="org.rsna.server.UsersXmlFileImpl" />

where:

port is the port number on which the HTTP server listens for connections.
ssl determines whether the HTTP server uses SSL. Values are "yes" and "no". The default is "no".
requireAuthentication determines whether users are forced to log in to the HTTP server. Values are "yes" and "no". The default is "no". (The HTTP server is typically operated without requiring authentication, thus allowing users to monitor the status of the system without having to log in.)
proxyIPAddress is the IP address of the proxy server. If this attribute is missing or blank, no proxy server is used. If a proxy server is configured, it is shared by all pipeline stages and servlets.
proxyPort is the port of the proxy server. If this attribute is missing or blank, no proxy server is used.
proxyUsername is the username which is to be supplied to the proxy server if proxy authentication is required. If this attribute is missing or blank, no credentials will be supplied to the proxy server.
proxyPassword is the password which is to be supplied to the proxy server if proxy authentication is required. If this attribute is missing or blank, no credentials will be supplied to the proxy server.
keystore specifies the path to the keystore file. If this attribute is missing or blank, the value keystore is supplied.
keystorePassword is the password for access to the keystore. It this attribute is missing or blank, the value ctpstore is used.
truststore specifies the path to the truststore file. If this attribute is missing or blank, the corresponding property is removed from the system properties.
truststorePassword is the password for access to the truststore.
usersClassName specifies the Java class to be used for authentication of users and their privileges. If this attribute is missing, the standard CTP implementation (shown above) is employed. This attribute should only be included if a special mechanism has been implemented on the site (for example, using LDAP - see CTP Authentication Using LDAP).

1.5 Plugins

A plugin is a component that adds functionality to CTP outside the context of a pipeline. Plugins can add servlets to the server as well as provide capabilities that may be accessed by pipeline stages.

1.6 Pipelines

A pipeline is a manager that moves data objects through a sequence of processing stages. Each stage in the pipeline performs a specific function on one or more of the four basic object types supported by MIRC:

FileObject
DicomObject
XmlObject
ZipObject

Each pipeline must contain at least one ImportService. Each pipeline stage may be provided access to a quarantine directory into which the stage places objects that it rejects, thus removing them from the pipeline and aborting further processing. Quarantine directories may be unique to each stage or shared with other stages. At the end of the pipeline, the manager calls the ImportService which provided the object to remove it from its queue.

There are four types of pipeline stages. Each is briefly described in subsections below.

1.6.1 ImportService

An ImportService receives objects via a protocol and enqueues them for processing by subsequent stages.

1.6.2 Processor

A Processor performs some kind of processing on an object. Processors are not intended to be queued. In the context of the current MIRC implementation, a Preprocessor is a Processor, as is an Anonymizer. The result of a processing stage is an object that is passed to the next stage in the pipeline.

1.6.3 StorageService

A StorageService stores an object in a file system. It is not queued, and it therefore must complete before subsequent stages can proceed. A StorageService may return the current object or the stored object in response to a request for the output object, depending on its implementation.

1.6.4 ExportService

An ExportService provides queued transmission to an external system via a defined protocol. Objects in the queue are full copies of the objects submitted; therefore, subsequent processing is not impeded if a queue is paused, and modifications made subsequently do not affect the queue entry, even if they occur before transmission. (Note: This behavior is different from that of the current MIRC implementation.) After entering an object in its queue, an ExportService returns immediately.

1.7 System Configuration

The CTP configuration is specified by an XML file called config.xml located in the same directory as the program. There can be one Server element specifying the port on which the HTTP server is to operate, and multiple Pipeline elements, each specifying the stages which comprise it. The name of the element defining a stage is irrelevant and can be chosen for readability; each stage in a pipeline is actually defined by its Java class, specified in the class attribute. Stages are loaded automatically when the program starts, and the loader tests the stage's class to determine what kind of stage it represents. It is possible to extend the application beyond the pre-defined stages available in the implementation as described in Extending CTP.

The following is an example of a simple configuration that might be used at an image acquisition site. It contains one pipeline which receives objects via the DICOM protocol, stores the objects locally, anonymizes them, and transmits them via HTTP (using secure sockets layer for encryption) to a principal investigator's site.

<Configuration>
   <Server port="80" />
   <Pipeline name="Main Pipeline">
        <ImportService
            name="DICOM Import"
            class="org.rsna.ctp.stdstages.DicomImportService"
            root="roots/dicom-import"
            port="1104" />
        <StorageService
            name="Storage"
            class="org.rsna.ctp.stdstages.FileStorageService"
            root="storage"
            returnStoredFile="no"
            quarantine="quarantines/storage" />
        <Anonymizer
            name="Anonymizer"
            class="org.rsna.ctp.stdstages.DicomAnonymizer"
            root="roots/anonymizer"
            script="scripts/da.script"
            quarantine="quarantines/anonymizer" />
        <ExportService
            name="HTTP Export"
            class="org.rsna.ctp.stdstages.HttpExportService"
            root="roots/http-export"
            url="https://university.edu:1443" />
   </Pipeline>
</Configuration>

Note that because the storage service appears in the pipeline before the anonymizer, the objects which are stored contain the PHI which was originally received, and because the anonymizer appears before the export service, anonymized objects are exported.

The following is an example of a simple configuration that might be used at a principal investigator's site. It contains one pipeline which receives objects via the HTTP protocol, stores them, and exports them to a DICOM destination:

<Configuration>
   <Server port="80" />
   <Pipeline name="Main Pipeline">
        <ImportService 
            name="HTTP Import"
            class="org.rsna.ctp.stdstages.HttpImportService"
            root="roots/http-import"
            ssl="yes"
            port="1443" />
        <StorageService
            name="Storage"
            class="org.rsna.ctp.stdstages.FileStorageService"
            root="D:/storage" 
            returnStoredFile="no"
            quarantine="quarantines/StorageServiceQuarantine" />
        <ExportService
            name="PACS Export"
            class="org.rsna.ctp.stdstages.DicomExportService"
            root="roots/pacs-export" 
            url="dicom://DestinationAET:ThisAET@ipaddress:port" />
   </Pipeline>
</Configuration>

Note that in the example above, non-DICOM objects are stored in the StorageService, but they are not exported by the DicomExportService. Each pipeline stage is responsible for testing the class of the object which it receives and processing (or ignoring) the object accordingly.

Multiple Pipeline elements may be included, but each must have its own ImportService element, and their ports must not conflict.

Each pipeline stage class has a constructor that is called with its configuration element, making it possible for special processor implementations to be passed additional parameters from the configuration.

1.8 Standard Plugins

The application includes built-in, standard plugins to provide features that are required in some clinical trials. The sections below show all the configuration attributes recognized by the standard plugins. Note that the configuration element for a plugin always has the tag name Plugin.

1.8.1 AuditLog

The AuditLog plugin provides a permanent log repository to meet the logging requirements of a 21CFR11-compliant clinical trial. Certain pipeline stages can be configured to make entries in the log repository.

The AuditLog plugin installs a servlet to provide browser access to the repository for admin users. The servlet is accessed with a path equal to the value of the AuditLog plugin's id attribute. It is possible to configure multiple AuditLog Plugin elements (with different id attributes) if multiple trials are serviced by a single CTP instance and it is desired to keep the log repositories separate. The configuration element for the AuditLog is:

        <Plugin
            name="log name"
            id="pluginID"
            class="org.rsna.ctp.stdplugins.AuditLog"
            root="root-directory" />

where:

name is any text to be used as a label on configuration and status pages.
id is text to be used to uniquely identify the plugin. Note that since the value of the attribute is used as the context of the servlet that provides access to the repository, it must be a single word (that is, it must not contain whitespace).
root is a directory for use by the plugin for internal storage of the database.

1.9 Standard Stages

The application includes several built-in, standard stages which allow most trials to be operated without writing any software. The sections below show all the configuration attributes recognized by the standard stages.

Attributes which specify directories can contain either absolute paths (e.g., D:/TrialStorage) or relative paths (e.g., quarantines/http-import-quarantine). Relative paths are relative to the directory in which the CTP application is located.

All standard stages have a root attribute which defines a directory for use by the stage for internal storage. All root directories must be unique, e.g. not shared with other stages.

All standard stages have an optional id attribute which, if present, must uniquely identify the stage across all pipelines. This attribute is required only when the stage must be accessed by another stage, for example, when a DatabaseExportService must interrogate a FileStorageService to determine the URL under which an object is stored.

Some standard stages have attributes which determine which object types are to be accepted by the stage. These attributes are:

acceptDicomObjects
acceptXmlObjects
acceptZipObjects
acceptFileObjects

The allowed values are yes and no. The default value for all these attributes is yes. Stages which are restricted to specific object types (e.g. DicomImportService, DicomAnonymizer, XmlAnonymizer, DicomFilter, DicomExportService) ignore the values of these attributes.

If a standard ImportService receives an object which it is not configured to accept, it quarantines the object, or if no quarantine has been defined for the stage, it discards the object.

If a Processor, StorageService, or ExportService receives an object that it is not configured to accept, it either ignores the object or passes it unmodified to the next pipeline stage. Thus, if an anonymizer which is not configured to anonymize XmlObjects receives an XmlObject, it passes the object on without anonymization.

1.9.1 Import Services

1.9.1.1 HttpImportService

The HttpImportService listens on a defined port for connections from HTTP clients and receives files transmitted using the HTTP protocol with Content-Type equal to application/x-mirc. The configuration element for the HttpImportService is:

        <ImportService 
            name="stage name"
            id="stage ID"
            class="org.rsna.ctp.stdstages.HttpImportService"
            root="root-directory"
            port="7777"
            ssl="yes"
            zip="no"
            requireAuthentication="no"
            acceptDicomObjects="yes"
            acceptXmlObjects="yes"
            acceptZipObjects="yes"
            acceptFileObjects="yes" 
            logConnections="no"
            logDuplicates="no"
            quarantine="quarantine-directory" >

            <accept ip="..."/>
            <reject ip="..."/>

        </ImportService>

where:

name is any text to be used as a label on configuration and status pages.
id is any text to be used to uniquely identify the stage.
root is a directory for use by the ImportService for internal storage and queuing.
port is the port on which the ImportService listens for connections.
ssl determines whether the port uses secure sockets layer (yes) or unencrypted http (no). The default is no.
zip determines whether files will be unzipped after reception (yes) or not (no). The default is no. This feature is intended for use with zipped transmissions from the HttpExportService.
requireAuthentication determines whether transmissions are required to have headers which identify a user which has the import privilege. The allowed values are yes) and no. The default is no.
acceptDicomObjects determines whether DicomObjects are to be enqueued when received.
acceptXmlObjects determines whether XmlObjects are to be enqueued when received.
acceptZipObjects determines whether ZipObjects are to be enqueued when received.
acceptFileObjects determines whether FileObjects are to be enqueued when received.
logConnections specifies whether to make a log entry for each object that is received. The log entry includes only the IP address of the sender. The values yes and all cause all connections to be logged. The value rejected causes only rejected connections to be logged. The default is no, meaning that no connections are logged. This capability is intended primarily for configuration debugging.
logDuplicates specifies whether to make a log entry for each object whose UID matches that of any other object in the last 20 that have been received. This capability is intended primarily for configuration debugging.
quarantine is a directory in which the ImportService is to quarantine objects that it receives but is configured not to accept.
The accept child element can be used to specify a white list of IP addresses determining which connections are to be accepted. One accept child element must appear for each IP address in the white list. If the white list is empty, the white list is not used to filter connections.
The reject child element can be used to specify black lists of IP addresses determining which connections are to be rejected. One reject child element must appear for each IP address in the black list. If the black list is empty, the black list is not used to filter connections.
For a connection to be accepted, the IP address of the remote client must be accepted by the white list and and not rejected by the black list.

1.9.1.2 PollingHttpImportService

The PollingHttpImportService obtains files by initiating HTTP connections to an external system. This ImportService is designed to work in conjunction with the PolledHttpExportService to allow penetration of a firewall without having to open an inbound port, as described in Security Issues. The configuration element for the PollingHttpImportService is:

        <ImportService 
            name="stage name"
            id="stage ID"
            class="org.rsna.ctp.stdstages.PollingHttpImportService"
            root="root-directory"
            url="http://ip:port"
            acceptDicomObjects="yes"
            acceptXmlObjects="yes"
            acceptZipObjects="yes"
            acceptFileObjects="yes" 
            quarantine="quarantine-directory" />

where:

name is any text to be used as a label on configuration and status pages.
id is any text to be used to uniquely identify the stage.
root is a directory for use by the ImportService for internal storage.
url is the URL of the PolledHttpExportService.
acceptDicomObjects determines whether DicomObjects are to be enqueued when received.
acceptXmlObjects determines whether XmlObjects are to be enqueued when received.
acceptZipObjects determines whether ZipObjects are to be enqueued when received.
acceptFileObjects determines whether FileObjects are to be enqueued when received.
quarantine is a directory in which the ImportService is to quarantine objects that it receives but is configured not to accept.

Notes:

The protocol part of the url must be http, although the actual protocol used by the PollingHttpImportService is not HTTP.
The PollingHttpImportService does not support SSL.
The PollingHttpImportService does not support a proxy server for its connections.

1.9.1.3 DicomImportService

The DicomImportService listens on a defined port for connections from DICOM Storage SCUs and receives files transmitted using the DICOM protocol. The DicomImportService accepts all Application Entity Titles. The configuration element for the DicomImportService is:

        <ImportService 
            name="stage name"
            id="stage ID"
            class="org.rsna.ctp.stdstages.DicomImportService"
            root="root-directory" 
            port="port number" 
            calledAETTag="00097770" 
            callingAETTag="00097772"
            connectionIPTag="00097774"
            timeTag="00097776"
            logConnections="no"
            logDuplicates="no"
            suppressDuplicates="no" >

            <accept ip="..."/>
            <reject ip="..."/>

            <accept calledAET="..."/>
            <reject calledAET="..."/>

            <accept callingAET="..."/>
            <reject callingAET="..."/>

        </ImportService>

where:

name is any text to be used as a label on configuration and status pages.
id is any text to be used to uniquely identify the stage.
root is a directory for use by the ImportService for internal storage and queuing.
port is the port on which the ImportService listens for connections.
calledAETTag is an optional DICOM element, specified in hex with no comma separating the group and element numbers, into which to store the AE Title which was used by the sender to specify the receiver in the association. If the attribute is missing or zero, or if the value does not parse as a hex integer, the DicomImportService does not store the AE Title of the receiver in the received DICOM object.
callingAETTag is an optional DICOM element, specified in hex with no comma separating the group and element numbers, into which to store the AE Title which was used by the sender to identify itself in the association. If the attribute is missing or zero, or if the value does not parse as a hex integer, the DicomImportService does not store the AE Title of the sender in the received DICOM object.
connectionIPTag is an optional DICOM element, specified in hex with no comma separating the group and element numbers, into which to store the IP address of the sender in the association. If the attribute is missing or zero, or if the value does not parse as a hex integer, the DicomImportService does not store the IP address of the sender in the received DICOM object.
timeTag is an optional DICOM element, specified in hex with no comma separating the group and element numbers, into which to store the system time when the object is received. If the attribute is missing or zero, or if the value does not parse as a hex integer, the DicomImportService does not store the system time in the received DICOM object. (The system time is the time in milliseconds since January 1, 1970.)
logConnections specifies whether to make a log entry for each object that is received. The log entry includes the SOPInstanceUID, the IP address of the sender in the association, and the calledAET and CallingAET. The values yes and all cause all connections to be logged. The value rejected causes only rejected connections to be logged. The default is no, meaning that no connections are logged. This capability is intended primarily for configuration debugging.
logDuplicatess specifies whether to make a log entry for each object whose SOPInstanceUID matches that of any other object in the last 20 that have been received. This capability is intended primarily for configuration debugging.
suppressDuplicates specifies whether to ignore objects which have the same SOPInstanceUID as any object in the last 10 objects received. Values are yes and no. The default is no. This capability is intended primarily for configuration debugging.
The accept child elements can be used to specify white lists of values determining which connections are to be accepted. One accept child element must appear for each value in the white list. If the white list is empty, the white list is not used to filter connections. There are three white lists, one each for client IP addresses (ip), SCU application entity titles (callingAET), and SCP application entity titles (calledAET).
The reject child elements can be used to specify black lists of values determining which connections are to be rejected. One reject child element must appear for each value in the black list. If the black list is empty, the black list is not used to filter connections. There are three black lists, one each for client IP addresses (ip), SCU application entity titles (callingAET), and SCP application entity titles (calledAET).
For a connection to be accepted, the IP address of the remote client must be accepted by the white list and and not rejected by the black list.

1.9.1.4 DirectoryImportService

The DirectoryImportService watches a directory and imports any files it finds in it. After the files are passed down the pipeline, they are deleted from the import directory. The purpose of this ImportService is to allow manual input of objects to the pipeline. The configuration element for the DirectoryImportService is:

        <ImportService 
            name="stage name"
            id="stage ID"
            class="org.rsna.ctp.stdstages.DirectoryImportService"
            root="root-directory"
            minAge="5000"
            fsName="..."
            fsNameTag=""
            acceptDicomObjects="yes"
            acceptXmlObjects="yes"
            acceptZipObjects="yes"
            acceptFileObjects="yes" 
            quarantine="quarantine-directory" />

where:

name is any text to be used as a label on configuration and status pages.
id is any text to be used to uniquely identify the stage.
root is a directory monitored by the ImportService for files to import.
minAge is the minimum age (in milliseconds) for files which are imported from the root directory. The default value is 5000; the minimum accepted value is 1000. The purpose of this attribute is to ensure that files are completely stored in the root directory before being imported.
fsName is the name of the FileSystem to be used by a FileStorageService that receives this object.
fsNameTag is the name of a DICOM element, specified in hex with no comma separating the group and element numbers, in which to store the value of the fsName attribute.
acceptDicomObjects determines whether DicomObjects are to be accepted.
acceptXmlObjects determines whether XmlObjects are to be accepted.
acceptZipObjects determines whether ZipObjects are to be accepted.
acceptFileObjects determines whether FileObjects are to be accepted.
quarantine is a directory in which the ImportService is to quarantine objects that it has handled (whether they were accepted for importing or not).

Note: For DicomObjects, if both the fsName and fsNameTag attributes are specified, the stage places the value of the fsName attribute in the element identified by fsNameTag. This allows a DirectoryImportService to mimic the behavior of a DicomImportService which stores the Called AE Title or Calling AE Title in an element for later use by a FileStorageService to assign the object to a FileSystem.

Note: When inserting the fsName value into the fsNameTag element in the DicomObject, there is a special feature. If the value of the fsName attribute is @filename, then the name of the file is inserted into the target element. If the filename ends in ".dcm", that string is removed from the end of the name before the name is inserted into the fsNameTag element.

1.9.1.5 ArchiveImportService

The ArchiveImportService walks the directory tree of a static archive and imports the files it finds. The files are copied from the archive and placed in a separate directory before being passed down the pipeline. When the files have been processed, they are deleted from the directory to which they were copied, but they remain in the archive. The purpose of this ImportService is to allow a complete archive to be processed. The ImportService checkpoints itself as it runs, and restarts where it left off if the program is stopped and restarted. The configuration element for the ArchiveImportService is:

        <ImportService 
            name="stage name"
            id="stage ID"
            class="org.rsna.ctp.stdstages.ArchiveImportService"
            root="root-directory"
            treeRoot="archive-root-directory"
            expandTARs="no"
            minAge="5000"
            fsName="..."
            fsNameTag=""
            acceptDicomObjects="yes"
            acceptXmlObjects="yes"
            acceptZipObjects="yes"
            acceptFileObjects="yes" 
            quarantine="quarantine-directory" />

where:

name is any text to be used as a label on configuration and status pages.
id is any text to be used to uniquely identify the stage.
root is a directory for use by the ImportService to manage imported files.
treeRoot is the root directory of the archive.
expandTARs determines whether the ImportService is to expand any TAR files it finds in the archive as they are imported. For archives containing TAR files encapsulating DICOM images, this attribute should be set to yes; otherwise, the TAR files will be treated as FileObjects containing no identifiers which would allow them to be connected to other objects.
minAge is the minimum age (in milliseconds) for files which are imported from the root directory. The default value is 5000; the minimum accepted value is 1000. The purpose of this attribute is to ensure that files are completely stored in the root directory before being imported.
fsName is the name of the FileSystem to be used by a FileStorageService that receives this object.
fsNameTag is the name of a DICOM element, specified in hex with no comma separating the group and element numbers, in which to store the value of the fsName attribute.
acceptDicomObjects determines whether DicomObjects are to be accepted.
acceptXmlObjects determines whether XmlObjects are to be accepted.
acceptZipObjects determines whether ZipObjects are to be accepted.
acceptFileObjects determines whether FileObjects are to be accepted.
quarantine is a directory in which the ImportService is to quarantine objects that it has handled (whether they were accepted for importing or not).

Note: For DicomObjects, if both the fsName and fsNameTag attributes are specified, the stage places the value of the fsName attribute in the element identified by fsNameTag. This allows an ArchiveImportService to mimic the behavior of a DicomImportService which stores the Called AE Title or Calling AE Title in an element for later use by a FileStorageService to assign the object to a FileSystem.

1.9.2 Processors

1.9.2.1 ObjectLogger

The ObjectLogger is a processor stage that logs the passage of objects as they flow past. Objects are passed on unmodified. The log entries are made in the system log and can be viewed in the log viewer servlet on the main admin server page. This stage is intended for initial configuration testing for a new trial; it creates one entry in the system log for each object it receives (unless the interval attribute is supplied with a value greater than one). Logging every object in a large production system can produce an unwieldy log file. The configuration element for the ObjectLogger is:

        <Processor
            name="stage name"
            class="org.rsna.ctp.stdstages.ObjectLogger"
            interval="1"
            verbose="yes" />

where:

name is any text to be used as a label on configuration and status pages.
interval is the interval between objects to log. The default is 1. This attribute can be used to measure performance without imposing a large load on the log file by setting the value to, for example, 1000.
verbose increases the amount of information logged.

1.9.2.2 ObjectCache

The ObjectCache is a processor stage that caches the current object as it flows past. Objects are passed on unmodified. The cached object is saved as a separate file to capture the object before it is changed by downstream processors. This stage is intended for use in conjunction with an audit stage that logs changes to objects or for special uses of the DirectoryExportService stage in the RSNA Image Sharing project. To make the cached object available to subsequent stages, the id attribute is mandatory. The configuration element for the ObjectCache is:

        <Processor
            name="stage name"
            class="org.rsna.ctp.stdstages.ObjectCache"
            id="stage ID"
            root="root-directory" />

where:

name is any text to be used as a label on configuration and status pages.
id is any text to be used to uniquely identify the stage.
root is a directory for use by the ObjectCache for temporary storage.

1.9.2.3 MemoryMonitor

The MemoryMonitor is a processor stage that provides a way to force garbage collection and/or to log the current memory in use by CTP. Objects are passed on unmodified. The log entries are made in the system log and can be viewed in the log viewer servlet on the main admin server page. This stage is intended for initial configuration testing for a new trial; it creates one entry in the system log for each object it receives (unless the interval attribute is supplied with a value greater than one). Logging every object in a large production system can produce an unwieldy log file. The configuration element for the MemoryMonitor is:

        <Processor
            name="stage name"
            class="org.rsna.ctp.stdstages.MemoryMonitor"
            interval="1"
            collectGarbage="yes"
            logMemoryInUse="yes" />

where:

name is any text to be used as a label on configuration and status pages.
interval is the interval between objects to log. The default is 1.
collectGarbage determines whether the stage is to force the garbage collector to run. The allowed values are yes and no. The default is yes.
logMemoryInUse determines whether the stage is to log the current amount of heap space in use. If garbage collection is enabled, the value logged is the memory in use after garbage collection is complete. The allowed values are yes and no. The default is yes.

1.9.2.4 DicomFilter

The DicomFilter is a processor stage that interrogates a DicomObject to determine whether it meets criteria specified in a script file. If a script file is either not configured or absent, objects are passed on unmodified. If a DicomObject meets the specified criteria, it is passed on unmodified. If it does not meet the criteria, it is quarantined. If no quarantine is specified, the object is deleted. Objects of any other type (XmlObject, ZipObject, FileObject) are passed on unmodified. The configuration element for the DicomFilter is:

        <Processor
            name="stage name"
            id="stage ID"
            class="org.rsna.ctp.stdstages.DicomFilter"
            root="root-directory" 
            log="no"
            script="scripts/dicom-filter.script"
            quarantine="quarantine-directory" />

where:

name is any text to be used as a label on configuration and status pages.
id is any text to be used to uniquely identify the stage.
root is a directory for use by the DicomFilter for temporary storage.
log determines whether the parameters obtained from the DicomObject are to be listed in the log for objects that fail the test. Values are "yes" and "no". The default is "no". This feature is intended for use while debugging a script.
script specifies the path to the script for the DicomFilter.
quarantine is a directory in which the DicomFilter is to quarantine objects that do not meet the criteria specified in the script file.

For information on specifying acceptance criteria in the script, see The CTP DICOM Filter.

1.9.2.5 XmlFilter

The XmlFilter is a processor stage that interrogates an XmlObject to determine whether it meets criteria specified in a script file. If a script file is either not configured or absent, objects are passed on unmodified. If an XmlObject meets the specified criteria, it is passed on unmodified. If it does not meet the criteria, it is quarantined. If no quarantine is specified, the object is deleted. Objects of any other type (DicomObject, ZipObject, FileObject) are passed on unmodified. The configuration element for the XmlFilter is:

        <Processor
            name="stage name"
            id="stage ID"
            class="org.rsna.ctp.stdstages.XmlFilter"
            root="root-directory" 
            script="scripts/xml-filter.script"
            quarantine="quarantine-directory" />

where:

name is any text to be used as a label on configuration and status pages.
id is any text to be used to uniquely identify the stage.
root is a directory for use by the XmlFilter for temporary storage.
script specifies the path to the script for the XmlFilter.
quarantine is a directory in which the XmlFilter is to quarantine objects that do not meet the criteria specified in the script file.

For information on specifying acceptance criteria in the script, see The CTP XML and Zip Filters.

1.9.2.6 ZipFilter

The ZipFilter is a processor stage that interrogates the manifest of a ZipObject to determine whether it meets criteria specified in a script file. If a script file is either not configured or absent, objects are passed on unmodified. If a ZipObject meets the specified criteria, it is passed on unmodified. If it does not meet the criteria, it is quarantined. If no quarantine is specified, the object is deleted. Objects of any other type (DicomObject, XmlObject, FileObject) are passed on unmodified. The configuration element for the XmlFilter is:

        <Processor
            name="stage name"
            id="stage ID"
            class="org.rsna.ctp.stdstages.ZipFilter"
            root="root-directory" 
            script="scripts/zip-filter.script"
            quarantine="quarantine-directory" />

where:

name is any text to be used as a label on configuration and status pages.
id is any text to be used to uniquely identify the stage.
root is a directory for use by the ZipFilter for temporary storage.
script specifies the path to the script for the XmlFilter.
quarantine is a directory in which the ZipFilter is to quarantine objects that do not meet the criteria specified in the script file.

For information on specifying acceptance criteria in the script, see The CTP XML and Zip Filters.

1.9.2.7 IDMap

The IDMap is a processor stage that constructs map tables for UID elements, AccessionNumber elements, and PatientID elements. The map tables contain the original values and the replacement values created by the first downstream anonymizer. These tables can be accessed by administrators using the IDMap servlet. The configuration element for the IDMap is:

        <Processor
            name="stage name"
            class="org.rsna.ctp.stdstages.IDMap"
            root="root-directory" />

where:

name is any text to be used as a label on configuration and status pages.
root is a directory for use by the IDMap for permanent storage of the map tables.

1.9.2.8 ObjectTracker

The ObjectTracker is a processor stage that tracks objects by date, PatientID, StudyInstanceUID, SeriesInstanceUID, and SOPInstanceUID. The values tracked are the ones in the objects at the time they arrive at the stage, so if they occur before anonymization, they contain PHI. The tracking tables can be accessed by administrators using the ObjectTracker servlet. The configuration element for the IDTracker is:

        <Processor
            name="stage name"
            class="org.rsna.ctp.stdstages.ObjectTracker"
            root="root-directory" />

where:

name is any text to be used as a label on configuration and status pages.
root is a directory for use by the IDTracker for permanent storage of its tracking tables.

1.9.2.9 DatabaseVerifier

The DatabaseVerifier is a processor stage that tracks objects which have been passed to an external database. The stage periodically polls the DatabaseExportService of the external database and maintains its own internal database indicating the status of the objects. The DBVerifierServlet provides a browser interface to the internal database. There can be no anonymizer stages (either DicomAnonymizers or DicomPixelAnonymizers) between the DatabaseVerifier and the DatabaseExportService. (The reason is that the DatabaseVerifier indexes objects by SOPInstanceUID, and it determines that the object in the remote database matches the one seen earlier by the DatabaseVerifier stage by comparing the hashes of the objects' binary contents.) The configuration element for the DatabaseVerifier is:

        <Processor
            name="stage name"
            class="org.rsna.ctp.stdstages.DatabaseVerifier"
            root="root-directory"
            url="http:ip:port"
            username=""
            password=""
            interval="10000"
            maxAge="0" />

where:

name is any text to be used as a label on configuration and status pages.
root is a directory for use by the DatabaseVerifier for permanent storage of its internal database.
url specifies the URL of the verification service of the external database's DatabaseExportService. If ssl is enabled on that verification service, the url attribute must start with https://. If this attribute is missing, no verication is performed, although the internal database is still maintained.
username specifies the username credential for inclusion in verification requests. If this attribute is missing or blank, credentials are not supplied in verification requests.
password specifies the password credential for inclusion in verification requests. If this attribute is missing or blank, credentials are not supplied in verification requests.
interval specifies time in milliseconds between queries of the external database's DatabaseExportService. If this attribute is missing or blank, the interval is 10 seconds (10,000 msec).
maxAge specifies the maximum time in days that an unverified object is allowed to remain in the unverified queue before the DatabaseVerifier removes it and stops trying to verify it with the external database's DatabaseExportService. If the attribute is missing or zero, objects remain in the queue forever until they are verified.

1.9.2.10 DicomDecompressor

The DicomDecompressor is a processor stage that converts DicomObjects containing encapsulated pixel data into DicomObjects with the Explicit VR Little Endian (EVRLE) transfer syntax. It passes all other object types unmodified. The DicomDecompressor can optionally be configured with a script file which is used like a DicomFilter to select objects for processing. If a script file is either not configured or absent, all objects are processed. The configuration element for the DicomAnonymizer is:

        <Decompressor
            name="stage name"
            id="stage ID"
            class="org.rsna.ctp.stdstages.DicomDecompressor"
            root="root-directory" 
            script="scripts/dicom-decompressor.script"
            quarantine="quarantine-directory" />

where:

name is any text to be used as a label on configuration and status pages.
id is any text to be used to uniquely identify the stage.
root is a directory for use by the DicomDecompressor for temporary storage.
script specifies the path to a script which can be used to select objects for decompression.
quarantine is a directory in which the stage is to quarantine objects.

1.9.2.11 DicomTranscoder

The DicomTranscoder is a processor stage that converts DicomObjects to a specified transfer syntax. It passes all other object types unmodified. The DicomTranscoder can optionally be configured with a script file which is used like a DicomFilter to select objects for processing. If a script file is either not configured or absent, all objects are processed.

An example of the use of this stage is a pipeline that decompresses multiframe ultrasound images, blanks regions of the frames containing PHI, and then recompresses the images to save space. Such a pipeline might have these stages in sequence:

DicomDecompressor
DicomPixelAnonymizer
DicomTranscoder

The configuration element for the DicomTranscoder is:

        <Transcoder
            name="stage name"
            id="stage ID"
            class="org.rsna.ctp.stdstages.DicomTranscoder"
            tsuid="transfer syntax UID"
            quality="100"
            root="root-directory" 
            script="scripts/dicom-transcoder.script"
            quarantine="quarantine-directory" />

where:

name is any text to be used as a label on configuration and status pages.
id is any text to be used to uniquely identify the stage.
tsuid is the DICOM transfer syntax UID of the processed DicomObject. These transfer syntaxes have been tested successfully:

tsuid="1.2.840.10008.1.2.1" (ExplicitVRLittleEndian)

tsuid="1.2.840.10008.1.2.4.70" (JPEGLossLess)

tsuid="1.2.840.10008.1.2.4.80" (JPEGLSLossLess)

tsuid="1.2.840.10008.1.2.4.90" (JPEG2000LossLess)

quality is an integer from 1 to 100 to indicate the desired quality of the processed DicomObject. This attribute is ignored in the lossless transfer syntaxes.
root is a directory for use by the DicomTranscoder for temporary storage.
script specifies the path to a script which can be used to select objects for transcoding.
quarantine is a directory in which the is to quarantine objects that generate quarantine calls during processing.

Notes:

If this stage is configured with the ExplicitVRLittleEndian transfer syntax, its function is similar to that of the DicomDecompressor stage. The difference is that although the output of the DicomDecompressor is EVRLE when it performs a conversion, it only converts DicomObjects that contain encapsulated pixel data, leaving all other objects unmodified, while the DicomTranscoder stage modifies all objects.
The quality attribute is not used in lossless compression transfer syntaxes.
The JPEGBaseline transfer syntax (tsuid="1.2.840.10008.1.2.4.50") does not work correctly.

1.9.2.12 DicomAnonymizer

The DicomAnonymizer is a processor stage that anonymizes DicomObjects and passes all other object types unmodified. The DicomAnonymizer is configured with a script file. If a script file is either not configured or absent, objects are passed unmodified. The configuration element for the DicomAnonymizer is:

        <Anonymizer
            name="stage name"
            id="stage ID"
            class="org.rsna.ctp.stdstages.DicomAnonymizer"
            root="root-directory" 
            lookupTable="scripts/lookup-table.properties"
            script="scripts/dicom-anonymizer.script"
            dicomScript="scripts/dicom-filter.script"
            quarantine="quarantine-directory" />

where:

name is any text to be used as a label on configuration and status pages.
id is any text to be used to uniquely identify the stage.
root is a directory for use by the DicomAnonymizer for temporary storage.
lookupTable specifies the path to the lookup table used by the DicomAnonymizer.
script specifies the path to the script for the DicomAnonymizer.
dicomScript specifies the path to an optional script file (in the same language as the DicomFilter), determining whether to anonymize the object.
quarantine is a directory in which the DicomAnonymizer is to quarantine objects that generate quarantine calls during processing.

Notes:

If the lookupTable attribute is missing, the lookup anonymizer function is disabled.
The script attribute specifies the instructions for modifying the individual elements in a DicomObject. If this attribute is missing, DicomObjects are not modified.
The dicomScript attribute specifies the instructions for determining whether to process the DicomObject. If this attribute is missing, all DicomObjects are accepted for processing. If the attribute is present, the computation must produce the value true for the DicomObject to be processed.
If the @integer function is used in the DicomAnonymizer script, the starting point can be reset by deleting the integers.db and integers.lg files from the directory specified in the root attribute. This will cause new integers to be assigned starting at 1. Deleting the files must be done while CTP is not running.

1.9.2.13 DicomPixelAnonymizer

The DicomPixelAnonymizer is a processor stage that blanks regions in DicomObjects which are images and passes all other object types unmodified. The DicomPixelAnonymizer is configured with a script file. If a script file is either not configured or absent, objects are passed unmodified. The configuration element for the DicomAnonymizer is:

        <Anonymizer
            name="stage name"
            id="stage ID"
            class="org.rsna.ctp.stdstages.DicomPixelAnonymizer"
            root="root-directory" 
            log="no"
            script="scripts/dicom-pixel-anonymizer.script"
            quarantine="quarantine-directory" />

where:

name is any text to be used as a label on configuration and status pages.
id is any text to be used to uniquely identify the stage.
root is a directory for use by the DicomPixelAnonymizer for temporary storage.
log determines whether the signature matched by the DicomObject is to be listed in the log. Values are "yes" and "no". The default is "no". This feature is intended for use while debugging the script.
script specifies the path to the script for the DicomPixelAnonymizer.
quarantine is a directory in which the DicomPixelAnonymizer is to quarantine objects that generate quarantine calls during processing.

For information on the script language, see The CTP DICOM Pixel Anonymizer.

Important notes:

The DicomPixelAnonymizer cannot process objects that contain encapsulated pixel data. To allow such objects to be processed, include a DicomDecompressor stage before the DicomPixelAnonymizer.
The DicomPixelAnonymizer does not remove PHI from the non-pixel data in an object. To de-identify that data, include a DicomAnonymizer stage in the pipeline.

1.9.2.14 XmlAnonymizer

The XmlAnonymizer is a processor stage that anonymizes XmlObjects and passes all other object types unmodified. The XmlAnonymizer is configured with a script file. If a script file is either not configured or absent, objects are passed unmodified. The configuration element for the XmlAnonymizer is:

        <Anonymizer
            name="stage name"
            id="stage ID"
            class="org.rsna.ctp.stdstages.XmlAnonymizer"
            root="root-directory" 
            script="scripts/xml-anonymizer.script" 
            quarantine="quarantine-directory" />

where:

name is any text to be used as a label on configuration and status pages.
id is any text to be used to uniquely identify the stage.
root is a directory for use by the Anonymizer for temporary storage.
script specifies the path to the script for the XmlAnonymizer.
quarantine is a directory in which the XmlAnonymizer is to quarantine objects that generate quarantine calls during processing.

1.9.2.15 ZipAnonymizer

The ZipAnonymizer is a processor stage that anonymizes ZipObjects and passes all other object types unmodified. The ZipAnonymizer is configured with a script file. If a script file is either not configured or absent, objects are passed unmodified. The configuration element for the ZipAnonymizer is:

        <Anonymizer
            name="stage name"
            id="stage ID"
            class="org.rsna.ctp.stdstages.ZipAnonymizer"
            root="root-directory" 
            script="scripts/zip-anonymizer.script" 
            quarantine="quarantine-directory" />

where:

name is any text to be used as a label on configuration and status pages.
id is any text to be used to uniquely identify the stage.
root is a directory for use by the Anonymizer for temporary storage.
script specifies the path to the script for the ZipAnonymizer.
quarantine is a directory in which the ZipAnonymizer is to quarantine objects that generate quarantine calls during processing.

1.9.3 Storage Services

1.9.3.1 FileStorageService

The FileStorageService stores objects in a file system. It automatically defines subdirectories beneath its root directory and populates them accordingly. The configuration element for the StorageService is:

        <StorageService
            name="stage name"
            id="stage ID"
            class="org.rsna.ctp.stdstages.FileStorageService"
            root="D:/storage" 
            type="month"
            timeDepth="0"
            acceptDuplicateUIDs="yes"
            acceptDicomObjects="yes"
            acceptXmlObjects="yes"
            acceptZipObjects="yes"
            acceptFileObjects="yes" 
            returnStoredFile="yes"
            setWorldReadable="no"
            setWorldWritable="no"
            fsNameTag="00097770"
            autoCreateUser="no"
            port="85"
            ssl="no"
            requireAuthentication="no"
            quarantine="quarantine-directory" >

            <jpeg frame="first" wmax="10000" wmin="96" q="-1" />

        </StorageService>

where:

name is any text to be used as a label on configuration and status pages.
id is any text to be used to uniquely identify the stage.
root is the root directory of the storage tree.
type determines the structure of the storage tree. The allowed values are:
- year: root/FSNAME/year/studyName, e.g. root/2008/123.456.789
- month: root/FSNAME/year/month/studyName, e.g. root/2008/06/123.456.789
- week: root/FSNAME/year/week/studyName, e.g. root/2008/36/123.456.789
- day: root/FSNAME/year/day/studyName, e.g. root/2008/341/123.456.789
- none: root/FSNAME/studyName, e.g. root/123.456.789

(FSNAME is the name of the file system to which the study belongs. See the fsNameTag attribute below for additional information.)

timeDepth specifies the length of time in days that studies are stored. The default value is 0, which means forever. If timeDepth is greater than zero, studies older than that value are automatically removed from storage.
acceptDuplicateUIDs determines whether objects with duplicate UIDs are to be stored under separate names or if a newer duplicate object is to overwrite an older one. Values are "yes" and "no". The default is "yes".
acceptDicomObjects determines whether DicomObjects are to be stored. Values are "yes" and "no". The default is "yes".
acceptXmlObjects determines whether XmlObjects are to be stored. Values are "yes" and "no". The default is "yes".
acceptZipObjects determines whether ZipObjects are to be stored. Values are "yes" and "no". The default is "yes".
acceptFileObjects determines whether FileObjects are to be stored. Values are "yes" and "no". The default is "yes".
returnStoredFile specifies whether the original object or a new object pointing to the file in the storage system is to be returned for processing by subsequent stages. Values are "yes" and "no". The default is "yes".
setWorldReadable determines whether the FileStorageService makes all files and directories readable by all users. Values are "yes" and "no". The default is "no". This attribute should only be used if users or other programs are to be allowed to access files without using the FileStorageService web server. This feature is not recommended.
setWorldWritable determines whether the FileStorageService makes all files and directories writable by all users. Values are "yes" and "no". The default is "no". This attribute should only be used if users or other programs are to be allowed to write files into the FileStorageService without using the FileStorageService web server. This feature is not recommended.
fsNameTag is an optional DICOM element, specified in hex with no comma separating the group and element numbers, which is used to specify the name of the root directory's child under which to store a received object. If the attribute is missing from the configuration or if the specified element is missing from the received object, or if the contents of the specified element are blank, the object is stored under the "__default" tree.
autoCreateUser determines whether the StorageService is to create a user for each new value of the element specified by the fsNameTag. The default is "no". The user is created with both the username and the password set to the value of the element specified by the fsNameTag.
port specifies the port on which a web server is to be started to provide access to the stored studies. If the attribute is missing, no web server is started for the FileStorageService.
ssl determines whether the web server uses SSL. Values are "yes" and "no". The default is "no".
requireAuthentication determines whether users are forced to log in to the web server. Values are "yes" and "no". The default is "no".
quarantine is a directory in which the StorageService is to quarantine objects that cannot be stored.

For more information on the embedded web server in the FileStorageService, see The CTP FileStorageService Web Server and The CTP FileStorageService Access Mechanism.

Notes:

Files are stored in a tree of directories with the root of the tree as defined in the root attribute of the configuration element.
Below the root are directories called FileSystems. A FileSystem may be defined by the value of an element in the object being stored by using the fsNameTag attribute. If no FileSystem is defined by the object, it is stored in the default FileSystem (__default).
Within a FileSystem, studies are grouped depending on the value of the type attribute. For example, if the type attribute has the value "month", studies are organized by year and month, e.g. "2007/09".
At the bottom of the hierarchy are directories organized by StudyInstanceUID, thus grouping all objects received for a specific study together in one directory.
Objects are stored with standard file extensions:
- .dcm for DicomObjects
- .xml for XmlObjects
- .zip for ZipObjects
- .md for FileObjects
Any object not containing a StudyInstanceUID or StudyUID is stored in the bullpen directory.
The fsNameTag attribute can be used to create storage trees based on element values like PatientID. It can also access elements in private groups, as might be done if the calledAETTag attribute of the DicomImportService is used to pass destination information. Similarly, the callingAETTag attribute of the DicomImportService could be used to pass source information, allowing separation of objects into FileSystems based on the sending system.

Notes on the jpeg child element:

The optional jpeg child element causes the FileStorageService to create one or more JPEG images for each DICOM image when it is stored.
The jpeg element should be included only when pre-computed JPEG images are required by an external application which directly references the disk drive containing the stored files (for example, the NBIA application).
When images are accessed through the FileStorageService web server's Storage Servlet or Ajax Servlet, they are produced dynamically, and jpeg elements are not required.
Multiple jpeg elements may appear if multiple images must be created (with different parameters) for each stored DICOM image.
The attributes specify the frame, width and quality parameters of the created image:
- The frame attribute which frame in multi-frame objects is to be saved. It has four allowed values: first, middle, last, all. The default is first. If all is selected and the StorageService supports saving all frames, then one JPEG image is created for each frame in the object. NOTE: The FileStorageService does not support the frame attribute and always behaves as if frame="first" is specified. The BasicFileStorageService fully supports the frame attribute.
- If the width of the parent DICOM image lies between the values of wmax and wmin, the width of the created image will be equal to the width of the parent.
- wmax specifies the maximum width of the created image. The default is 10000.
- wmin specifies the minimum width of the created image. The default is 96.
- The height of the created image is automatically computed to provide the same aspect ratio as the parent.
- q specifies the compression quality for the created image. Allowed values are 1 through 100, with larger values producing better quality (and larger file sizes). The system default is triggered by specifying -1, which generally produces a good image.
A JPEG image file created in response to a jpeg child element is stored in the same directory as the parent DICOM image.
The filename of a created image is constructed from:
- the name of the parent file,
- a suffix in square brackets identifying the parameters used to create it,
- and a .jpeg extension.
The parameters appear in the order: wmax, wmin, q, and are separated by semicolons.
For example, a JPEG image created from FO-29126.dcm might have the name FO-29126.dcm[400;96;-1].jpeg.
If a 96-pixel wide thumbnail is required for an external application, the following jpeg child element could be specified:

        <jpeg wmax="96" wmin="96" q="-1" />

1.9.3.2 BasicFileStorageService

The BasicFileStorageService stores objects in a file system. It provides no organization of the files and no means of access to them. It is intended for use in situations where direct file access is provided through an external application like NBIA. The configuration element for the StorageService is:

        <StorageService
            name="stage name"
            id="stage ID"
            class="org.rsna.ctp.stdstages.BasicFileStorageService"
            index="D:/storage"
            root="D:/storage/root" 
            nLevels="3" 
            maxSize="200" 
            acceptDicomObjects="yes"
            acceptXmlObjects="yes"
            acceptZipObjects="yes"
            returnStoredFile="yes"
            logDuplicates="no"
            quarantine="quarantine-directory" >

            <jpeg frame="first" wmax="10000" wmin="96" q="-1" />

        </StorageService>

where:

name is any text to be used as a label on configuration and status pages.
id is any text to be used to uniquely identify the stage.
index is the directory in which the index is stored.
root is the root directory of the storage tree.
nLevels defines the depth of the storage tree. The default is 3.
maxSize defines the maximum number of files or directories in each node of the storage tree. The default is 200.
acceptDicomObjects determines whether DicomObjects are to be stored. Values are "yes" and "no". The default is "yes".
acceptXmlObjects determines whether XmlObjects are to be stored. Values are "yes" and "no". The default is "yes".
acceptZipObjects determines whether ZipObjects are to be stored. Values are "yes" and "no". The default is "yes".
returnStoredFile specifies whether the original object or a new object pointing to the file in the storage system is to be returned for processing by subsequent stages. Values are "yes" and "no". The default is "yes".
logDuplicates specifies whether an entry is to be made in the log whenever a file is received which has the same SOPInstanceUID as a file which has already been stored. Values are "yes" and "no". The default is "no".
quarantine is a directory in which the StorageService is to quarantine objects that cannot be stored.

Notes:

Files are stored in a tree of directories with the root of the tree as defined in the root attribute of the configuration element.
The index directory must not appear under the root directory. A convenient approach is shown in the example above, where the root directory appears under the index directory.
The number of files which will be stored under any directory in the root is maxSize**(nLevels-1). For the default values of the nLevels and maxSize parameters (3 and 200), this is 40,000.
Directories are created at the top level (root) when existing directories are full. There is no maximum number of top-level directories; however, it is wise to consider the number of objects which are expected to be stored and to select values of nLevels and maxSize which would keep the number of top-level directories below 1000.
For storage requirements of 10 million files, the default values of nLevels and maxSize are fine.
For storage requirements of 10 billion files, nLevels="4" and maxSize="300" would work well.
Files are stored as leaves at the bottom of the tree.
No organization into related groups (e.g. by StudyInstanceUID) is provided.
Files are indexed by UID (e.g., SOPInstanceUID).
A duplicate object (e.g., one whose UID matches the UID of an object already stored) overwrites the stored object in the same place in the storage system (e.g., the same directory and the same filename), and any required jpeg images are recreated, overwriting the previously stored ones.
FileObjects, which do not contain UIDs, are not stored; they are simply passed to the next stage.
Files are stored with standard file extensions:
- .dcm for DicomObjects
- .xml for XmlObjects
- .zip for ZipObjects
See the section on the FileStorageService for a description of the jpeg child element.
If jpeg child elements appear, the files which they create are not counted against the maxSize parameter. Thus, if maxSize is 200 and two jpeg child elements appear, the bottom directories in the tree could contain 600 files. If frame="all" is specified and multi-frame objects are to be processed, this could result in many times that number. In situations where a given choice of maxSize could result in more than 1000 files in one directory, it is advisable to reduce maxSize and increase nLevels.

1.9.3.3 DirectoryStorageService

The DirectoryStorageService stores DicomObjects in a directory structure with no index. It optionally organizes the objects in subdirectories according to a list of element tags. The organization can be obtained either from the current object or from an object that had been cached in another stage. This StorageService is intended for use in situations where files are passed to an external application like the Edge Server in the RSNA Image Sharing Project. It can also be used to pass files to DirectoryImportService stages in other pipelines. The configuration element for the StorageService is:

        <StorageService
            name="stage name"
            id="stage ID"
            dicomScript="scripts/dss.script"
            cacheID="cache stage ID"
            structure="dir1/dir2/dir3/..."
            defaultString="UNKNOWN"
            whitespaceReplacement="_"
            class="org.rsna.ctp.stdstages.DirectoryStorageService"
            root="D:/storage/root" 
            returnStoredFile="yes"
            quarantine="quarantine-directory" >
        </StorageService>

where:

name is any text to be used as a label on configuration and status pages.
id is any text to be used to uniquely identify the stage.
dicomScript specifies the path to a script that examines the contents of a DicomObject and determines whether the object is to be accepted for storage. If the attribute is missing, all objects are accepted.
cacheID is the ID of an ObjectCache stage that can supply an object from which to obtain values to populate the directory names in the storage hierarchy. If this attribute is missing, the values are obtained from the current object.
root is the root directory of the storage tree.
structure is an optional sequence of directory names specifying the hierarchy of the storage tree. Directories in the sequence are separated by slashes. Each directory name in the sequence can consist of text and/or DICOM tags. If a directory name in the sequence includes one or more DICOM tags, the values of the corresponding elements in the current (or cached) DICOM object are substituted in the directory name for the tags. See the notes below for more details and examples of directory structures. If this attribute is missing, all files are stored in the root directory.
defaultString specifies a string used in place of a DICOM tag if the corresponding element is either missing or empty. If this attribute is missing, "UNKNOWN" is used.
whitespaceReplacement specifies a string used to replace whitespace, slash, or backslash characters in a directory name. If this attribute is missing, the underscore character is used.
returnStoredFile specifies whether the original object or a new object pointing to the file in the storage system is to be returned for processing by subsequent stages. Values are "yes" and "no". The default is "yes".
quarantine is a directory in which the StorageService is to quarantine objects that cannot be stored.

Notes:

The stored object's SOPInstanceUID is used as the file name.
No file extension is appended to the SOPInstanceUID when creating the file name.
In directory names, DICOM tags are hex integers, formatted in parentheses or square brackets. Tags may optionally include commas to separate the group and element numbers. Leading zeroes are good form but not required in group numbers. Leading zeroes are required in element numbers. Commas are removed before parsing tags, so (20,D) is not equivalent to (20,000D).
This example shows tags for PatientID/AccessionNumber/StudyInstanceUID: (0010,0020)/[00080050]/(0020,000D).
This example shows how text and multiple tags can be combined in a single directory name: (0010,0020)/(0020,000D) - [00080050]. In this case the PatientID is used as the top-level directory, with a subdirectory consisting of the StudyInstanceUID, a space, a hyphen, another space, and the AccessionNumber.
Whitespace replacement is performed on all the text of a directory name, after substitution of the DICOM element values for any tags in the name, so in the example in the previous note, the separator between the StudyInstanceUID and the AccessionNumber would actually appear in the directory name as "_-_".

1.9.4 Export Services

1.9.4.1 HttpExportService

The HttpExportService queues objects and transmits them via HTTP with Content-Type application/x-mirc. The configuration element for the HttpExportService is:

        <ExportService
            name="stage name"
            id="stage ID"
            class="org.rsna.ctp.stdstages.HttpExportService"
            root="root-directory" 
            url="http://ipaddress:port/path"
            zip="no"
            username="username"
            password="password"
            acceptDicomObjects="yes"
            acceptXmlObjects="yes"
            acceptZipObjects="yes"
            acceptFileObjects="yes"
            dicomScript="scripts/df.script"
            xmlScript="scripts/xf.script"
            zipScript="scripts/zf.script"
            logDuplicates="no"
            interval="5000" />

where:

name is any text to be used as a label on configuration and status pages.
id is any text to be used to uniquely identify the stage.
root is a directory for use by the ExportService for internal storage and queuing.
url specifies the destination system's URL.
zip determines whether files will be zipped before transmission (yes) or not (no). The default is no. This feature is intended for use with the HttpImportService.
username specifies the username credential for inclusion in the header during the transmission. This allows an HttpImportService to authenticate transmissions. If the username attribute is not present or has a whitespace value, no header is generated.
password specifies the password credential for inclusion in the header during the transmission.
acceptDicomObjects determines whether DicomObjects are to be exported.
acceptXmlObjects determines whether XmlObjects are to be exported.
acceptZipObjects determines whether ZipObjects are to be exported.
acceptFileObjects determines whether FileObjects are to be exported.
dicomScript specifies the path to a script which examines the contents of a DicomObject and determines whether the object is to be exported.
xmlScript specifies the path to a script which examines the contents of an XmlObject and determines whether the object is to be exported.
zipScript specifies the path to a script which examines the contents of a ZipObject and determines whether the object is to be exported.
logDuplicates specifies whether to make a log entry for each object whose UID matches that of any other object in the last 20 that have been exported. This capability is intended primarily for configuration debugging.
interval is the sleep time (in milliseconds) between polls of the export queue.

Notes:

The default interval is 5 seconds. The minimum allowed value is one second. The maximum allowed value is 10 seconds.
The protocol part of the url can be http or https, the latter causing connections to be initiated using secure sockets layer.
If a proxy server is not in use, the proxy attributes must be omitted.
For an object to be accepted for export, the object type must be accepted (e.g., acceptDicomObjects="yes") and the object must pass the script test. If the script attribute is not supplied, the test returns true by default and the object is accepted. See The CTP DICOM Filter and The CTP XML and Zip Filters for information about the script languages.

1.9.4.2 PolledHttpExportService

The PolledHttpExportService queues objects and transmits them in the HTTP response stream of a received connection. Files are transmitted with Content-Type equal to application/x-mirc. This ExportService is designed to work in conjunction with the PollingHttpImportService to allow penetration of a firewall without having to open an inbound port, as described in Security Issues. The configuration element for the Polled HttpExportService is:

        <ExportService
            name="stage name"
            id="stage ID"
            class="org.rsna.ctp.stdstages.PolledHttpExportService"
            root="root-directory" 
            port="listening-port"
            acceptDicomObjects="yes"
            acceptXmlObjects="yes"
            acceptZipObjects="yes"
            acceptFileObjects="yes"
            dicomScript="scripts/df.script"
            xmlScript="scripts/xf.script"
            zipScript="scripts/zf.script" />

where:

name is any text to be used as a label on configuration and status pages.
id is any text to be used to uniquely identify the stage.
root is a directory for use by the ExportService for internal storage and queuing.
port is the port on which the ExportService listens for connections.
acceptDicomObjects determines whether DicomObjects are to be exported.
acceptXmlObjects determines whether XmlObjects are to be exported.
acceptZipObjects determines whether ZipObjects are to be exported.
acceptFileObjects determines whether FileObjects are to be exported.
dicomScript specifies the path to a script which examines the contents of a DicomObject and determines whether the object is to be exported.
xmlScript specifies the path to a script which examines the contents of an XmlObject and determines whether the object is to be exported.
zipScript specifies the path to a script which examines the contents of a ZipObject and determines whether the object is to be exported.

Notes:

For an object to be accepted for export, the object type must be accepted (e.g., acceptDicomObjects="yes") and the object must pass the script test. If the script attribute is not supplied, the test returns true by default and the object is accepted. See The CTP DICOM Filter and The CTP XML and Zip Filters for information about the script languages.
The PolledHttpExportService does not support SSL.

1.9.4.3 DicomExportService

The DicomExportService queues objects and transmits them to a DICOM Storage SCP. The configuration element for the DicomExportService is:

        <ExportService
            name="stage name"
            id="stage ID"
            class="org.rsna.ctp.stdstages.DicomExportService"
            root="root-directory" 
            quarantine="quarantine-directory"
            url="dicom://DestinationAET:ThisAET@ipaddress:port"
            forceClose="no"
            calledAETTag="00097770" 
            callingAETTag="00097772"
            dicomScript="scripts/df.script"
            throttle="0"
            interval="5000" />

where:

name is any text to be used as a label on configuration and status pages.
id is any text to be used to uniquely identify the stage. This attribute is required only when the stage is accessed by other stages. Its value, when supplied, must be unique across all pipelines.
root is a directory for use by the ExportService for internal storage and queuing.
quarantine is a directory in which the DicomExportService is to quarantine objects that fail to be transmitted because they were rejected by the destination DICOM Storage SCP (usually because a presentation context could not be negotiated). Such objects would always fail, so they must be removed from the export queue. If no quarantine directory is specified, failed objects are deleted.
url specifies the destination DICOM Storage SCP's URL.
forceClose specifies whether the DICOM association is to be closed after each transfer. Allowed valuers are yes and no. The default value is no. This parameter can be set to yes if it appears that the destination SCP is resetting the association and causing a problem with transfers.
calledAETTag is an optional DICOM element, specified in hex with no comma separating the group and element numbers, which is to be used by the DicomExportService to obtain the AE Title which specifies the receiver in the association. If the attribute is missing or zero, or if the value does not parse as a hex integer, or if the identified element does not exist in a DicomObject being exported, the DicomExportService uses the AE Title specified in the url attribute.
callingAETTag is an optional DICOM element, specified in hex with no comma separating the group and element numbers, which is to be used by the DicomExportService to obtain the AE Title which specifies the sender in the association. If the attribute is missing or zero, or if the value does not parse as a hex integer, or if the identified element does not exist in a DicomObject being exported, the DicomExportService uses the AE Title specified in the url attribute.
dicomScript specifies the path to a script which examines the contents of a DicomObject and determines whether the object is to be exported.
throttle sets the minimum time (in milliseconds) between exports to the destination. The default is 0 milliseconds. The maximum allowed value is 5 seconds.
interval is the sleep time (in milliseconds) between polls of the export queue.

Note: The default interval is 5 seconds. The minimum allowed value is one second. The maximum allowed value is 10 seconds.

Notes:

For an object to be accepted for export, the object type must be accepted (e.g., acceptDicomObjects="yes") and the object must pass the script test. If the script attribute is not supplied, the test returns true by default and the object is accepted. See The CTP DICOM Filter for information about the script language.

1.9.4.4 FtpExportService

The FtpExportService queues objects and transmits them to an FTP server. The configuration element for the FtpExportService is:

        <ExportService
            name="stage name"
            id="stage ID"
            class="org.rsna.ctp.stdstages.FtpExportService"
            root="root-directory" 
            url="ftp://ipaddress:port/path"
            username="..."
            password="..."
            acceptDicomObjects="yes"
            acceptXmlObjects="yes"
            acceptZipObjects="yes"
            acceptFileObjects="yes"
            dicomScript="scripts/df.script"
            xmlScript="scripts/xf.script"
            zipScript="scripts/zf.script"
            interval="5000" />

where:

name is any text to be used as a label on configuration and status pages.
id is any text to be used to uniquely identify the stage.
root is a directory for use by the ExportService for internal storage and queuing.
url specifies the destination FTP server's URL:
- ipaddress can be a numeric address or a domain name.
- port is the port on which the FTP listener listens. The default port is 21.
- path is the base directory on the FTP server in which the FtpExportService will create StudyInstance directories.
username specifies the username under which the FtpExportService will log in to the FTP server.
password specifies the password to be used in the login process.
acceptDicomObjects determines whether DicomObjects are to be exported.
acceptXmlObjects determines whether XmlObjects are to be exported.
acceptZipObjects determines whether ZipObjects are to be exported.
acceptFileObjects determines whether FileObjects are to be exported.
dicomScript specifies the path to a script which examines the contents of a DicomObject and determines whether the object is to be exported.
xmlScript specifies the path to a script which examines the contents of an XmlObject and determines whether the object is to be exported.
zipScript specifies the path to a script which examines the contents of a ZipObject and determines whether the object is to be exported.
interval is the sleep time (in milliseconds) between polls of the export queue.

Notes:

For an object to be accepted for export, the object type must be accepted (e.g., acceptDicomObjects="yes") and the object must pass the script test. If the script attribute is not supplied, the test returns true by default and the object is accepted. See The CTP DICOM Filter and The CTP XML and Zip Filters for information about the script languages.
The default interval is 5 seconds. The minimum allowed value is one second. The maximum allowed value is 10 seconds.
The FtpExportService stores files in subdirectories of the path part of the URL, organized by StudyInstanceUID (or StudyUID in the case of non-DICOM files). Files not containing a StudyUID are stored in the bullpen directory under the path directory.
If the directory specified by the path does not exist, it is created.
Files are stored within their directories with names that consist of the date and time (to the millisecond) when they were transferred to the server.
If a file is transmitted multiple times, multiple copies of the file will appear with its directory, each with the date/time of the transfer.
No index of the studies and files is created on the server.

1.9.4.5 AimExportService

The AimExportService queues objects and transmits them to an AIM Data Service. The configuration element for the AimExportService is:

        <ExportService
            name="stage name"
            id="stage ID"
            class="org.rsna.ctp.stdstages.AimExportService"
            root="root-directory" 
            url="http://ipaddress:port/path"
            xmlScript="scripts/xf.script"
            logResponses="none"
            quarantine="quarantine-directory"
            interval="5000" />

where:

name is any text to be used as a label on configuration and status pages.
id is any text to be used to uniquely identify the stage.
root is a directory for use by the ExportService for internal storage and queuing.
url specifies the destination AIM Data Service URL:
- ipaddress can be a numeric address or a domain name.
- port is the port on which the AIM Data Service listens.
- path is the path identifying the AIM Data Service on the destination server.
xmlScript specifies the path to a script which examines the contents of an XmlObject and determines whether the object is to be exported.
logResponses specifies whether the contents of the response from the AIM Data Service are to be entered into the CTP log file. The recognized values are:
- all - log all responses
- failed - log only the responses that indicate that the Data Service rejected the object
- none - do not log responses.

The default, if the attribute is missing or has any other value, is not to log.

quarantine is a directory in which the AimExportService is to quarantine objects that fail to be transmitted because they were rejected by the destination AIM Data Service. If no quarantine directory is specified, failed objects are deleted.
interval is the sleep time (in milliseconds) between polls of the export queue.

Notes:

The AimExportService only transmits XmlObjects. It ignores all other object types.
The AimExportService only transmits XmlObjects whose root element is "ImageAnnotation".
The XmlObject must pass the script test. If the xmlScript attribute is not supplied, the test returns true by default and the object is accepted. See The CTP XML and Zip Filters for information about the script language.
The default interval is 5 seconds. The minimum allowed value is one second. The maximum allowed value is 10 seconds.

1.9.4.6 DatabaseExportService

The DatabaseExportService queues objects and submits them to a DatabaseAdapter class, which must be written specially for the database in question. The configuration element for the DatabaseExportService is:

        <ExportService
            name="stage name"
            id="stage ID"
            class="org.rsna.ctp.stdstages.DatabaseExportService"
            adapterClass="org.myorg.MyDatabaseAdapter"
            poolSize="1"
            fileStorageServiceID="ID of referenced FileStorageService"
            root="root-directory"
            acceptDicomObjects="yes"
            acceptXmlObjects="yes"
            acceptZipObjects="yes"
            acceptFileObjects="yes"
            interval="5000"
            port="5001"
            ssl="no"
            requireAuthentication="no" />

where:

name is any text to be used as a label on configuration and status pages.
id is any text to be used to uniquely identify the stage.
adapterClass is the class name of the database's adapter class. See Implementing a DatabaseAdapter for more information.
poolSize specifies the number of subordinate export threads. The default is 1. The allowed values are from 1 to 10.
fileStorageServiceID is the ID of the FileStorageService which manages objects referenced by the data stored in the database. This attribute is required only when the database must have direct access to the files on the FileStorageService.
root is a directory for use by the ExportService for internal storage and queuing.
acceptDicomObjects determines whether DicomObjects are to be exported.
acceptXmlObjects determines whether XmlObjects are to be exported.
acceptZipObjects determines whether ZipObjects are to be exported.
acceptFileObjects determines whether FileObjects are to be exported.
interval is the sleep time (in milliseconds) between polls of the export queue. The default interval is 5 seconds. The minimum allowed value is one second. The maximum allowed value is 10 seconds.
port is the port number on which the DatabaseExportService receives requests for verification of objects having been inserted into the database. If no port is configured, requests for verification are not accepted.
ssl determines whether the verification port uses SSL. Values are "yes" and "no". The default is "no".
requireAuthentication determines whether verification requests must include credentials. Values are "yes" and "no". The default is "no".

2 Security Issues

In a clinical trial, transmission of data from image acquisition sites to the principal investigator site involves penetrating at least one firewall. Since the image acquisition site initiates an outbound connection, this only rarely requires special action. At the principal investigator's site, where the connection is inbound, some provision must be made to allow the connection to reach its destination. There are two basic solutions. The simplest solution is to open a port in the firewall at the principal investigator's site and route connections for that port to the computer running the CTP application. In some institutions, however, security policies prohibit this solution. The alternative is to use the PolledHttpExportService and PollingHttpImportService to allow data to flow without having to open any ports on the internal network to inbound connections.

Using this latter solution requires two computers, each running CTP. One computer is placed in the border router's DMZ with one port open to the internet, allowing connections to the HttpImportService of the program running in that computer. That program's pipeline includes a PolledHttpExportService which queues objects and waits for a connection before passing them onward. The second computer is placed on the internal network. Its program has a pipeline which starts with a PollingHttpImportService. That ImportService is configured to make outbound connections to the DMZ computer when a file is requested. This allows files to pass through the firewall on the response stream of the outbound connection without having to open any ports to the internal network.

3 Notes

3.1 Java Cryptography Extension

The anonymizer pipeline stages (DicomAnonymizer, XmlAnonymizer, and ZipAnonymizer) use classes in the Java Cryptography Extension (JCE). The JCE has been included in the Java JRE since at least Java 1.5. To enable the use of the JCE, an entry must appear in the Java/jre/lib/security/java.security file. In the latest Java versions, the entry is automatically included. The most recent versions include a section in the file that looks like this:

# There must be at least one provider specification in java.security.
# There is a default provider that comes standard with the JDK. It
# is called the "SUN" provider, and its Provider subclass
# named Sun appears in the sun.security.provider package. Thus, the
# "SUN" provider is registered via the following:
#
#    security.provider.1=sun.security.provider.Sun
#
# (The number 1 is used for the default provider.)
#
# Note: Providers can be dynamically registered instead by calls to
# either the addProvider or insertProviderAt method in the Security
# class.
#
# List of providers and their preference orders (see above):
#
security.provider.1=sun.security.provider.Sun
security.provider.2=sun.security.rsa.SunRsaSign
security.provider.3=com.sun.net.ssl.internal.ssl.Provider
security.provider.4=com.sun.crypto.provider.SunJCE
security.provider.5=sun.security.jgss.SunProvider
security.provider.6=com.sun.security.sasl.Provider
security.provider.7=org.jcp.xml.dsig.internal.dom.XMLDSigRI
security.provider.8=sun.security.smartcardio.SunPCSC
security.provider.9=sun.security.mscapi.SunMSCAPI

On older Javas, it appears that there are no security.provider... lines in the file. If no provider is specified, the anonymizer will crash when it tries to load a JCE class. If that happens, you will see an error in the Launcher's Console tab. You can either edit the Java/jre/lib/security/java.security file and add the security.provider... lines shown above or uninstall Java and get the latest version.

3.2 Important Note for Unix/Linux Platforms

Unix and its derivatives require that applications listening on ports with numbers less than 1024 have special privileges. On such systems, it might be best to put all import services and all web servers on ports above this value. The default configuration puts the web server on port 80 for Windows platforms because that is the default port for the web. On Linux platforms, the default configuration puts the web server on port 1080. This can be changed easily in the CTP-launcher application when CTP is started.

3.3 ImageIO Tools for Macintosh

The Java Advanced Imaging ImageIO Tools is a component which provides methods for creating and reading image files. It supports many image file types, and it is designed to be extensible. The authors (Gunter Zeilinger, et al.) of the DICOM toolkit (dcm4che) used by CTP extended the ImageIO Tools to support DICOM.

The ImageIO Tools consists of two parts, a top-level library written in Java and runnable on any platform, and a native library which implements certain compression/decompression functions. The latter library is unique to each platform.

The top-level library consists of two files:

jai_imageio.jar
clibwrapper_jiio.jar

There is no Macintosh installer for the ImageIO Tools. You can obtain the two files above by getting the zip file for a Linux installation and unpacking it. Place the two files into /System/Library/Java/Extensions.

There is no native library available for the Macintosh. As a consequence, a CTP installation running on a Macintosh cannot support the viewing of images which contain encapsulated pixel data. Most clinical images do not contain such data, but some modalities produce it. If a problem appears in viewing images stored in a FileStorageService or BasicFileStorageService stage, or if a log entry appears indicating a problem in the ImageIO Tools, check the SOP Class of the image to see if it is one which has encapsulated pixel data.

For more information on the ImageIO Tools, see this article.

MIRC CTP

1 Clinical Trial Processor (CTP)

1.1 Installation

1.2 Running CTP

1.3 Configuration Files

1.4 Server

1.5 Plugins

1.6 Pipelines

1.6.1 ImportService

1.6.2 Processor

1.6.3 StorageService

1.6.4 ExportService

1.7 System Configuration

1.8 Standard Plugins

1.8.1 AuditLog

1.9 Standard Stages

1.9.1 Import Services

1.9.1.1 HttpImportService

1.9.1.2 PollingHttpImportService

1.9.1.3 DicomImportService

1.9.1.4 DirectoryImportService

1.9.1.5 ArchiveImportService

1.9.2 Processors

1.9.2.1 ObjectLogger

1.9.2.2 ObjectCache

1.9.2.3 MemoryMonitor

1.9.2.4 DicomFilter

1.9.2.5 XmlFilter

1.9.2.6 ZipFilter

1.9.2.7 IDMap

1.9.2.8 ObjectTracker

1.9.2.9 DatabaseVerifier

1.9.2.10 DicomDecompressor

1.9.2.11 DicomTranscoder

1.9.2.12 DicomAnonymizer

1.9.2.13 DicomPixelAnonymizer

1.9.2.14 XmlAnonymizer

1.9.2.15 ZipAnonymizer

1.9.3 Storage Services

1.9.3.1 FileStorageService

1.9.3.2 BasicFileStorageService

1.9.3.3 DirectoryStorageService

1.9.4 Export Services

1.9.4.1 HttpExportService

1.9.4.2 PolledHttpExportService

1.9.4.3 DicomExportService

1.9.4.4 FtpExportService

1.9.4.5 AimExportService

1.9.4.6 DatabaseExportService

2 Security Issues

3 Notes

3.1 Java Cryptography Extension

3.2 Important Note for Unix/Linux Platforms

3.3 ImageIO Tools for Macintosh

Navigation menu

Search